ProFlush OBD-P
ProFlush OBD-P is a powdered pre-flush that was designed to simultaneously wet formation surfaces and help remove oil based drilling muds as preparation for the next step of the cementing process. WBD-P disperses quickly into water and does not clump or gel, causing no problems during pumping. ProFlush OBD-P is pumped ahead of the cement to separate it from oil based drilling muds. When pumped ahead of the cement ProFlush OBD-P will leave downhole surfaces water wet and remove drilling mud residue, which can result in an improvement in quality of the bond between cement, casing and formation. ProFlush OBD-P should be compatible with all oil based muds and cement slurries but if uncertain test for compatibility before using the product. ProFlush OBD-P should be compatible with nonionic and anionic compounds.
Product Name: ProFlush OBD-P
Chemical Name: Cementing pre-flush
Product Applications:
ProFlush OBD-P is a powdered pre-flush that was designed to simultaneously wet formation surfaces and help remove oil based drilling muds as preparation for the next step of the cementing process. WBD-P disperses quickly into water and does not clump or gel, causing no problems during pumping.
ProFlush OBD-P is pumped ahead of the cement to separate it from oil based drilling muds. When pumped ahead of the cement ProFlush OBD-P will leave downhole surfaces water wet and remove drilling mud residue, which can result in an improvement in quality of the bond between cement, casing and formation.
ProFlush OBD-P should be compatible with all oil based muds and cement slurries but if uncertian test for compatibilitybefore using the product. ProFlush OBD-P should be compatible with nonionic and anionic compounds.
- Appearance: Tan Powder
- pH, (neat): 8.0 – 10.0
- Density (lbs/ft3)) 51 – 59
- Specific gravity: 1.70
on the skin, ingest or inhale dust generated during the use of the product. Try to prevent the generation of dust.