ProFlush WBD-223 is a powdered pre-flush that wets formation surfaces and removes water-based drilling muds, priming for cementing. It disperses quickly into water, causing no pumping issues. Used ahead of cement, it leaves surfaces water-wet and removes mud residue, enhancing the bond between cement, casing, and formation. Test for compatibility with water-based muds and cement slurries before use, also suitable for nonionic and anionic additives.
Product Name: ProFlush WBD-223
Chemical Name: Cementing Pre-Flush
ProFlush WBD-223 is a powdered pre-flush that was designed to simultaneously wet formation surfaces and help remove water-based drilling muds as preparation for the next step of the cementing process. WBD-223 disperses quickly into water and does not clump or gel, causing no problems during pumping.
ProFlush WBD-223 is pumped ahead of the cement to separate it from water based drilling muds. When pumped ahead of the cement ProFlush WBD-223 will leave downhole surfaces water wet and remove drilling mud residue, which can result in an improvement in quality of the bond between cement, casing, and formation.
ProFlush WBD-223 should be compatible with all water based muds and cement slurries but if uncertian test for compatibility before using the product. ProFlush WBD-223 should be compatible with nonionic and anionic additives.
- Appearance: Tan powder
- pH, (neat): 7.0 – 9.0
- Density (lbs/ft3): 62.0
- Specific gravity: 2.10
ProFlush WBD-223 was developed in collaboration with Olive & Branch Merchandizing & Distribution LLC.