ProFlush WBD-260

ProFlush WBD-260 is a powdered pre-flush that was designed to simultaneously wet formation surfaces and help remove water based drilling muds as preparation for the next step of the cementing process. WBD-260 disperses quickly into water and does not clump or gel, causing no problems during pumping. ProFlush WBD-260 is pumped ahead of the cement to separate it from water based drilling muds. When pumped ahead of the cement ProFlush WBD-260 will leave downhole surfaces water wet and remove drilling mud residue, which can result in an improvement in quality of the bond between cement, casing and formation. ProFlush WBD-260 should be compatible with all water based muds and cement slurries but if uncertain test for compatibility before using the product. ProFlush WBD-260 should be compatible with nonionic and anionic additives.

Click here to download ProFlush WBD-260

Product Name: ProFlush WBD-260

Chemical Name: Cementing pre-flush

Product Applications:

ProFlush WBD-260 is a powdered pre-flush that was designed to simultaneously wet formation surfaces and help remove water based drilling muds as preparation for the next step of the cementing process. WBD-260 disperses quickly into water and does not clump or gel, causing no problems during pumping.

ProFlush WBD-260 is pumped ahead of the cement to separate it from water based drilling muds. When pumped ahead of the cement ProFlush WBD-260 will leave downhole surfaces water wet and remove drilling mud residue, which can result in an improvement in quality of the bond between cement, casing and formation.

ProFlush WBD-260 should be compatible with all water based muds and cement slurries but if uncertian test for compatibility before using the product. ProFlush WBD-260 should be compatible with nonionic and anionic additives.

Typical Properties:

  • Appearance: Tan powder
  • pH, (5%w/w in DI water): 8.0 – 10.0
  • Density (lbs/ft3): 51 – 59
  • Specific gravity: 2.01
Storage and Handling:
 
Storage:  Make sure that partial bags are tightly sealed because the product is slightly hygroscopic.
 
Handling: Use appropriate personal protective equipment when working with ProFlush WBD-260. Do not get into the eyes, on the skin, ingest or inhale dust generated during the use of the product. Try to prevent the generation of dust during the use of the product. Make sure that proper ventilation and eye washes/safety showers are present in the immediate work area. Do not flush product into the sewer system.