Cementing
Oil & Gas Operators use “Oil Well Cement” to secure steel production tubing and isolate desired production zones (oil, gases) and preventive contamination with aqueous aquafers and surface waters.
| NAME | Product Number | Function | CAS # | Description | More Information |
|---|---|---|---|---|---|
| ProFlush | WBD-243 | Liquid preflush for WBM | 68515-73-1 | A liquid pre-flush designed to wet formation surfaces, aiding in the removal of water-based drilling muds before cementing. | Click Here |
| ProFlush | WBD-223 | Dry preflush for WBM | 68425-94-5, 127087-87-0,1332-58-7,14808-60-7 | A powdered pre-flush that wets formation surfaces and removes water-based drilling muds, priming for cementing. | Click Here |
| ProFlush | WBD-260 | Dry preflush for WBM | 127087-87-0, 1332-58-7, 14808-60-7 | A powdered pre-flush, wetting formation surfaces and removing water-based drilling muds for cementing preparation. | Click Here |
| ProFlush | OBD-22 | Liquid preflush for OBM | 127087-87-0, 68584-23-6, 104-76-7, 107-21-1 | Optimize oil-based mud removal for better cementing. | Click Here |
| ProFlush | OBD-P | Dry preflush for OBM | 127087-87-0, 1332-58-7, 68584-23-6, 14808-60-7 | The powdered pre-flush for oil-based mud removal and superior cementing. | Click Here |
| OilPro | CD-100 | Defoamer | Proprietary | Oil based defoamer for cement | Click Here |
| OilPro | CLD-6 | Defoamer | Proprietary | Water based defoamer for cement | Click Here |
| OilPro | CSE-2 | Cement strength enhancer | 69012-64-2, 14808-60-7, 65997-15-1 | A blend of materials that improve cement strength without causing issues with set time or pump rates | Click Here |
| OilPro | CSE-4 | Cement strength enhancer | 69012-64-2, 14808-60-7, 65997-15-1 | Slightly more reactive version of CSE-2 | Click Here |
| OilPro | CSA-3 | Cement strength enhancer | Proprietary | A blend of materials that improves the suspension properties of cement at elevated temperatures while not dramatically increasing the up-top viscosity of the slurry | Click Here |
| OilPro | FWCA-1 | Free water control agent | Proprietary | A formulated product that is used to control the amount of free water present in a cement slurry, while not having a negative effect on the stability of the slurry. Can be used up to 140F | Click Here |
| ProFlush | LSS-1 | Spacer surfactant | Proprietary | A surfactant system that can be used to clean a wide array of oil based drilling muds, is compatible with nonionic and anionic materials and will not cause compatibility issues with water based spacers | Click Here |
| ProFlush | DSS-1 | Spacer surfactant | Proprietary | DSS-1 and DSS-2 are dry versions of LSS-1 but with different ratios of the surfactants in the formulation. DSS-1 is the more hydrophilic of the two products and should be used with more polar oil based muds. | Click Here |
| ProFlush | DSS-2 | Spacer surfactant | Proprietary | DSS-1 and DSS-2 can be used in combination to fine tune formation cleaning and compatibility. | Click Here |
| OilPro | VIS-1 | Cement viscosifier | Proprietary | VIS-1 is designed to viscosify cement slurries to enhance stability of the slurry and control free fluid, especially in high water ratio cement slurries. | Click Here |
| OilPro | ACI-1 | High temperature corrosion inhibitor | Proprietary | ACI-1 is a medium temperature acid corrosion inhibitor suitable for use in 15% HCl, 28% HCl and mixtures of HCl/HF. Oil Pro ACI-1 exhibits excellent solubility and is effective OilPro in inhibiting corrosion on low alloy steels, such as N-80, L-80 and J-55, and corrosion resistant alloys, such as 13Cr. Oil Pro ACI-1 is effective to 375°F using standard corrosion inhibitor intensifiers. | Click Here |
| OilPro | ADI-1 | Dispersion and inhibition of asphaltenes | Proprietary | OilPro ADI-1 is a general purpose inhibitor and dispersant for asphaltenes. The product is a combination of aromatic solvents plus an anionic dispersant. The anionic dispersant will inhibit the asphaltenes by absorbing onto the asphaltene particle as it precipitates, preventing an increase in particle size and creating a dispersion of asphaltenes. A typical use rate for OilPro ADI-1 needed to remove asphaltenes is 10 to 20 gallons of product down the annulus or flowline at one to four week intervals. A static soak time of two to eight hours is needed for maximum effectiveness. The actual use rate and soak time will need to be determined by the customer. | Click Here |
| OilPro | CII-1 | Intensifier for corrosion inhibitors, works to 350F | Proprietary | OilPro CII-1 can be used from ambient temperature up to 400°F in HCl. OilPro CII-1 can be used in oil and gas acidizing operations with hydrochloric acid concentration up to 32%. OilPro CII-1 can also be used in sulfuric and hydrofluoric acid blends with a temperature up to 350°F. OilPro CII-1 also provides excellent corrosion protection for coil tubing used in acidizing. | Click Here |
| OilPro | CLD-7 | General purpose defoamer, 10% silicon emulsion | Proprietary | Oil Pro CLD-7 is a water dispersible industrial antifoam containing 10% active ingredients. Oil Pro CLD-7 contains a combination of silicone polymer and dispersant, and has been found to exhibit superior foam control in systems over a wide range of operating temperatures (up to boiling). | Click Here |
| OilPro | HSS-1 | H2S scavenger, bis-oxazolidine based | Proprietary | Oil Pro HSS-1 is a highly active low-nitrogen non-triazine hydrogen sulfide/mercaptans scavenger concentrate for downhole, drilling, pipeline, bubble tower and flowline to react rapidly with hydrogen sulfide and organic mercaptans to form stable, non-hazard reaction products. Oil Pro HSS-1 works as both oil-soluble and water-soluble scavengers, and a typical recommendation for a field blend would consist of diluting it with 50% aromatic solvent (oil-soluble applications) or 50% water (water-soluble applications). | Click Here |
| OilPro | HSS-2 | H2S scavenger, MEA-triazine based | Proprietary | Oil Pro HSS-2 is a hydrogen sulfide scavenger concentrate for drilling, flowline, and bubble tower applications to react rapidly with hydrogen sulfide and form stable, non-hazard reaction products. A typical recommendation for a field blend for gas treating would consist of diluting the product 25% - 50% with fresh water and methanol. | Click Here |
| OilPro | HSS-3 | H2S scavenger, glyoxal based | Proprietary | Oil Pro HSS-3 is a water-based hydrogen sulfide scavenger. This product functions at all pH’s. The product is commonly utilized in acid stimulation to react with the hydrogen sulfide released by the acid dissolving iron sulfide. It reacts with the H2S so that it is not harmful to the personnel during flowback and prevents the iron sulfide from redepositing. The product will dissolve some iron sulfide in a flowing system. | Click Here |
| OilPro | OFS-112 | non-emulsifying surfactant, nonionic | Proprietary | OilPro OFS-112 is a highly effective nonionic non-emulsifier that prevents emulsions in both acid and fracturing fluids. OilPro OFS-112 contains surfactants which deliver superior break times normally within 60 seconds even in the presence of crude oils with a high probability for sludge build-up. OilPro OFS-112 is also a highly effective anti-sludge agent that prevents iron/asphaltene sludge build-up. | Click Here |